 |
 |
|
|
 |
700 Hydraulic
Bollard
|
 |
|
|
|
| Power Supply |
240 vac |
| Power Requirement |
400W / 1.8A |
| Opening time |
6 sec |
| Height |
0.7 m | |
 |
Hydraulically Operated Bollard to Control
Vehicular Access
Autostop 700 is a
hydraulically operated bollard specifically designed to
protect premises and for use in traffic control in both
private and public areas. It consists of a flanged cylinder
providing a casing to the rising post, an electronic control
box (ELPRO 10 CEI) and a motor pump unit.
The housing
cylinder is inserted into a foundation tube cemented slightly
deeper than one meter into the ground. This is firmly secured
to the foundation by an anchor-fitted flange.
Suitable
openings in the lower and middle sections of the post are
provided both to drain possible water ingress and also to gain
access and to lead cables into the post for the electrical
connections.
Inside the location cylinder is the rising
post, which can be activated by a range of control devices,
such as radio transmitters or key switch through the main
control box.
The combination of colours and the
circular design make the Autostop 700 aesthetically pleasing.
An internal flashing light is fitted as standard that gives a
warning signal when the post is in operation.
The
compact assembly of integral parts, copper hydraulic pipes and
a combination of vertical guide rods ensure a smooth operation
during the entire working cycle.
In power failure or
emergency situations it is possible to override the hydraulic
mechanism from the top of the post by means of a specially
designed spanner, which is supplied with the system. The
bollard can then easily be manually lowered into the housing
cylinder.
Autostop 700 is designed to conform
fully to existing safety
regulations.
|
|
| |
